If your garage door isn’t working, you’re going to have a tough time getting your car in or out. Garage doors can stop working for a number of reasons, from a broken spring to a faulty sensor. If you’re not sure what the problem is, don’t try to fix it yourself! Call a professional garage door repair technician and they will be able to help you get your door up and running again. In the meantime, here are some tips on what to do if your garage door won’t open.
What to do if your garage door opener isn’t working
If your garage door opener isn’t working, the first thing you should do is check the power supply. Make sure that the unit is plugged in and that the outlet it’s plugged into is working. If the outlet is fine, then check to see if there’s a blown fuse or tripped circuit breaker.
Here are few things you can do:
Checking the power
If you have a garage door opener that uses a chain or belt, check to see if the chain or belt is loose. A loose chain or belt can cause the opener to stop working.
Checking the sensors
Another reason why your garage door might not be working is because of the sensors. The sensors are what tell the opener when to stop and start. If the sensors are dirty or misaligned, they might not be working properly.
Here are a few things you can do:
Wiping the sensors
Checking the alignment
Checking the remote control
If you have a remote control for your garage door opener, make sure that the batteries are fresh and that the remote is working. You can also try resetting the opener.
Checking the springs
If your garage door isn’t opening, it could be because of a broken spring. The springs are what help to lift the door, so if they’re broken, the door won’t be able to open.
Replacing the springs
If you’ve tried all of these things and your garage door still isn’t working, it’s time to call a professional. A professional garage door technician will be able to diagnose the problem and get your door working again in no time.
The photo-eye sensors are obstructed
One of the safety features on a garage door is the photo-eye sensors. The sensors are located on either side of the garage door and they emit a beam of light. The sensor needs to be unobstructed in order for the garage door to close. If something is blocking the sensor, the garage door will not close.
The wall switch is not working
Another safety feature on a garage door is the wall switch. The wall switch is located inside the garage, near the garage door. The switch controls the power to the opener. If the switch is not working, the opener will not work.
There is something caught in the tracks
If something is caught in the tracks, the garage door will not be able to open or close. The tracks are what the garage door rollers ride on. If something is blocking the garage door tracks, the door will not be able to move.
Lubricating the chain or belt
If your garage door opener has a chain or belt, it needs to be lubricated in order for it to work properly. A dry chain or belt can cause the opener to stop working.
Tightening the chain or belt
If the chain or belt is loose, it can cause the opener to stop working. You’ll need to tighten the chain or belt to fix the problem.
Dallas Garage Door Tech – Best Solution Provider for Your Garage Door Problems
If you are having trouble with your garage door or opener, then call Dallas Garage Door Tech. We are the best solution provider for all your garage door needs in the Dallas area. We offer same-day service and we have a team of experienced and certified garage door technicians who can help you with any problem.
